On 2005/03/23, at 5:38, Androtech wrote:
Dear All,
I bought one IP PHONE from Integrated Networks which was showed to wiki too:
http://www.voip-info.org/tiki-index.php?page=Intergrated-Networks
I have problems with the Asterisk authentication. It does't want to LOG IN to Asterisk; it always says "LOG ON FAILED". I'm using the IAX2 protocol and all paramters seems to be correct.
Does somebody use the same IP PHONE with Asterisk and IAX2? Can someone tell me the right configuration for it?
My actual configuration is:
locale ip: 192.168.0.75 subnet mask: 255.255.255.0 router ip: 192.168.0.1 dns: 192.168.0.1
protocol: iax2 service type: common use service marked service address: 192.168.0.1:4569 nat trasversal: disabled phone number: 103 account: ipphone pin: test register port: 4569 signal port:1701 control port:1721 rtp port:1721 local type: auto
the phone firmware is V.1.38.009
My Asterisk extension is:
[ipphone] type=friend username=ipphone secret=test auth=md5 host=dynamic context=fullaccess mailbox=103 callerid="ipphone"<103>
Thanks for any help Regards,
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
I have this phone which uses a 168S chip. Although it says it supports IAX2, it seems that firmware 1.38
only supporta some sort of proprietary VOIP provider protocol, forgot which one. You'll have to upgrade the
firmware to 1.42 to get real IAX2 support. Also when upgrading the firmware set the debug option to
"no check" (if your config menu has this option), otherwise it will not upgrade. (seems to be a security precaution)
Hope this helps
Daniel
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
