I'm trying to figure out if this is a nat problem.
I have a private network behind a freebsd nat box. The * server is on
a static nat, with a private ip of 10.139.10.165. I'm connecting with
sjphone as the client from 10.139.10.159.
I am calling out using simpletelecom. When connecting directly to
simpletelecom using sjphone everything works fine. When I go through
* I get disconnected after about 20 seconds. I cannot seem to get my
settings correct, and I don't understand the debug logs enough to know
what's happening.
What I would like to know is what is going on with the following
snippet of the debug log. Why is * looking for an extension
10.139.10.165? The only place that string is configured is in the
proxy domain in sjphone. sip.conf and extensions.conf are at the
bottom. I can post more debug logs or configs if needed.
Chris
------------------------------------------------------
14 headers, 10 lines
Found RTP audio format 3
Found RTP audio format 101
Peer audio RTP is at port 8.3.40.113:17398
Found description format GSM
Found description format telephone-event
Capabilities: us - 0x8000e (gsm|ulaw|alaw|h263), peer - audio=0x2
(gsm)/video=0x0 (nothing), combined - 0x2 (gsm)
Non-codec capabilities: us - 0x1 (g723), peer - 0x1 (g723), combined -
0x1 (g723)
set_destination: Parsing
<sip:[EMAIL PROTECTED];ftag=as6987e0c2;lr> for address/port to
send to
set_destination: set destination to 63.218.92.199, port 5060
Transmitting:
ACK sip:[EMAIL PROTECTED] SIP/2.0
Via: SIP/2.0/UDP 10.139.10.165:5060;branch=z9hG4bK30f501e4
Route: <sip:[EMAIL PROTECTED]:5060>
From: "chris2034" <sip:[EMAIL PROTECTED]>;tag=as6987e0c2
To: <sip:[EMAIL PROTECTED]>;tag=12E96748-1828
Contact: <sip:[EMAIL PROTECTED]>
Call-ID: [EMAIL PROTECTED]
CSeq: 103 ACK
User-Agent: Asterisk PBX
Content-Length: 0
(no NAT) to 63.218.92.199:5060
Sip read:
OPTIONS sip:10.139.10.165 SIP/2.0
Content-Length: 0
Call-ID: [EMAIL PROTECTED]
From: <sip:[EMAIL PROTECTED]>;tag=1589539025512
CSeq: 25 OPTIONS
Max-Forwards: 70
To: <sip:10.139.10.165>
Via: SIP/2.0/UDP
10.139.10.159;rport;branch=z9hG4bK0a8b0a9f0131c9b1424093c4000078380000008b
8 headers, 0 lines
Looking for 10.139.10.165 in local
Transmitting (no NAT):
SIP/2.0 404 Not Found
Via: SIP/2.0/UDP
10.139.10.159;branch=z9hG4bK0a8b0a9f0131c9b1424093c4000078380000008b
From: <sip:[EMAIL PROTECTED]>;tag=1589539025512
To: <sip:10.139.10.165>;tag=as1788bc7c
Call-ID: [EMAIL PROTECTED]
CSeq: 25 OPTIONS
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
Contact: <sip:10.139.10.165>
Accept: application/sdp
Content-Length: 0
to 10.139.10.159:5060
Destroying call '[EMAIL PROTECTED]'
sip.conf:
[general]
context=local ; Default context for incoming calls
port=5060 ; UDP Port to bind to (SIP standard
port is 5060)
bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all)
srvlookup=yes ; Enable DNS SRV lookups on outbound calls
register => XXXXXXX:XXXXXXX:[EMAIL PROTECTED]/chris2034
[simpleconnect-sip]
type=peer
nat=no
realm=simpletelecom.com
host=sip.simpletelecom.com
username=XXXXXXX
secret=XXXXXXX
dtmfmode=rfc2833
[simpletelecom-incoming]
type=peer
context=local
host=sip.simpletelecom.com
[chris]
nat=yes
context=local
type=friend
host=dynamic
dtmfmode=rfc2833
username=chris
secret=XXXXXXX
canreinvite=no
reinvite=no
callerid="Chris" <6000>
disallow=all
allow=gsm
allow=ulaw
extensions.conf
[simpleconnect]
exten => _22.,1,SetCallerID("XXXXXXX",<Chris>,a)
exten => _22.,2,Dial(SIP/${EXTEN:[EMAIL PROTECTED],30,r)
exten => _22.,3,Hangup()
[local]
include=>simpleconnect
[default]
include = >local
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
