Hi,
I use a Handytone 486. While you have to configure dtmfmode=rfc2833 in asterisk,
it will not work if you do not set the dtmf mode to "SIP info" in the ATA itself.
So you might try different combinations fo dtmf modes in both asterisk and
the phone you are using until you get the correct one.
Hope this helps
Daniel
On 2005/03/19, at 14:27, John Goerzen wrote:
Hi,
I have a SIP phone connecting to my asterisk server, using dtmfmode=rfc2833. When calling from the SIP phone to internal asterisk services, such as voicemail, it works fine.
But when I call out to the PSTN, from the SIP phone, via my X100P, the
call will be connected fine. After that, though, any numbers I dial on
the SIP phone are lost. I hear them on the phone, but I don't hear them
on the remote end of the PSTN connection.
I know that rfc2833 is correct for the SIP phone since it is working fine with internal asterisk services.
I have tried the wiki, searching the list, and google. No luck. Ideas would be welcome!
-- John
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
