Debugging shows;
vpb/1-1: New call for context [local_pstn] > Caller ID disabled
vpb.conf is...
[general] type = v4pci cards = 1
[interfaces] echocancel = on board = 1 txhwgain => 12 txgain => 12 context = local_pstn mode = fxo group=1 callerid = on channel = 1 channel = 2 channel = 3 channel = 4
Any ideas?
----- Original Message ----- From: "James Andrewartha" <[EMAIL PROTECTED]>
Sent: Tuesday, January 04, 2005 11:50 PM
Subject: [Asterisk-Users] CallerID in Australia & Analogue PSTN PhoneSystem
Howard Lowndes wrote:Is there anyone using * in AU that has successfully extracted the CLID from an incoming analogue PSTN phone call, and would like to spread the word?
Yes, I have. I'm using a Voicetronix OpenLine4 card. I did have an issue
with the config file, you have to set callerid=yes before each channel,
unless you're running CVS from 2004/12/13 21:04:12 or later. What hardware
are you using? chan_vpb has useful debugging info for callerid at debug level 4.
James Andrewartha DAA Sysadmin
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
