Yeah Im sure they are FXO. They came from Digium install in 2,3,4. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Richard Lyman Sent: Sunday, February 27, 2005 1:50 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Outbound call on TDM400P
Guy C. Guckenberger wrote: > Ok all here is a strange one...... > > I have a TDM400P with 3 fxo modules. I can very rarely make an > outbound call to the PSTN....about once every 10 tries. However if I > use a analog phone pluged into the same phone line as one of the tdm > channels say channel 4, and I place the analog phone off hook and then > place a call via asterisk , it work everytime. It seems like the > TDM400p is having trouble grabbing the outbound circuit. I have tried > this on all three fxo modules and get the same results. > Inbound calls work fine as do SIP calls. Anyone else run into this? > Maybe I have bad hardware? > strange, you say they are FXO modules (and you only have 3), and they don't work (1:10), and that when you use a phone (which is as fxs device) it works great in port 4, well .... are you sure they are FXO modules and not FXS? if you only have 4 modules, why would you be pluggin into port 4 when the 3 moules should be installed in order. (ports 1,2,3) so, either you aren't telling us everything, or you were confused and bought FXS modules when you wanted FXO modules, which is it? _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
