channel => 1-4
I haven't used [EMAIL PROTECTED] so I don't know how it starts asterisk, but just a thought,
does it do modprobe wcfxo then ztcfg? Try doing this at the terminal, if something's
wrong you should get error messages.
Hope this helps.
Daniel
On 2005/02/16, at 4:18, Rich Adamson wrote:
I removed the ; before channel => 1 and restarted * and I get an error.
Ouch ... error while writing audio data: : Broken pipe
?????
I then replaced the ; and its starts??
I'm upgrading from .4 to .5
.4 was running
Thanks, David
On Tue, 2005-02-15 at 12:46 -0500, dean collins wrote:David, You will need to go into the Zapata.conf file and remove the ; before channel => 1
(modify it to suit however you want to set up your 4 X100p lines.
The outgoing lines you see in FOP are only example lines, you will need
to modify FOP to get rid of them etc.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David Shaw
Sent: Tuesday, February 15, 2005 11:02 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] [EMAIL PROTECTED] .5 Setup help with 4 X100P
Hello All, I installed [EMAIL PROTECTED] .5 last night. I was able to
configure some extensions for the house and they work fine. I just can't
make inbound and/or outbound calls. The Flash Operator Panel shows four
external icons and my new extensions.
I have four X100P and two Broadvoice sip accounts.
The broken pipe message usually means something is misconfigured. Check your zapata.conf against the following:
context=inbound-bus signalling=fxs_ks echocancel=yes echotraining=800 echocancelwhenbridged=no rxgain=3.0 txgain=0.0 immediate=yes channel => 1
After making changes to zapata.conf, be sure to stop and start *. Don't use reload on these type changes.
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
