On Sat, 2005-02-05 at 08:28, Eric Bishop wrote: > Hi All, > > I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and > out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN > Line" tab) so Asterisk answers the call rather than the SPA-3000. It > is all working perfectly except I can't get the SPA-3000 to pass > caller ID to Asterisk. It passes "Display Name", "User ID" and any > "PSTN CID Number Prefix" I have configured. > > I have adjusted "PSTN Ring Thru Delay" to 10 as I realise caller ID is > not presented until the second ring in oz. I have also verified that > caller ID is enabled on the line (with an analogue LCD handset). > > Has any aussie out there had success getting the SPA-3000 to pass > caller ID to Asterisk?
Not specifically the Sipura, but check that your circuit has caller id presentation enabled (it is off by default). Check the wiki about Australian Caller ID, I posted there the other day. > > The only settings I havn't played with yet is "Caller ID Method" (on > the Regional tab). It is set to the default of "Bellcore (N.Amer, > China)" which I beleive is correct. > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you choose Linux; when you want a system that just works, you choose Microsoft." ------------------------------------------ "Flatter government, not fatter government; Get rid of the Australian states." _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
