Ronald,
First step, try switching the modules around on your card. I had the same issue and had to rma the module.
Kyle
On Feb 2, 2005, at 12:07 PM, Ronald Hartmann wrote:
Erros on boot. Running Release 1 Latest Version.
Feb 2 13:32:20 localhost kernel: Zapata Telephony Interface Registered on major 196 Feb 2 13:32:20 localhost kernel: Freshmaker version: 71 Feb 2 13:32:20 localhost kernel: Freshmaker passed register test Feb 2 13:32:29 localhost kernel: Module 0: Installed -- AUTO FXS/DPO Feb 2 13:32:29 localhost kernel: Timeout waiting for calibration of module 1 Feb 2 13:32:29 localhost kernel: Timeout waiting for calibration of module 1 Feb 2 13:32:29 localhost kernel: Proslic Failed on Second Attempt to Auto Calibrate Feb 2 13:32:29 localhost kernel: Module 1: Installed -- MANUAL FXS Feb 2 13:32:29 localhost kernel: Module 2: Installed -- AUTO FXO (FCC mode) Feb 2 13:32:29 localhost kernel: Module 3: Installed -- AUTO FXO (FCC mode)
It used to boot no problem...
Jan 17 14:51:12 localhost kernel: Zapata Telephony Interface Registered on major 196 Jan 17 14:51:12 localhost kernel: Freshmaker version: 71 Jan 17 14:51:12 localhost kernel: Freshmaker passed register test Jan 17 14:51:15 localhost kernel: Module 0: Installed -- AUTO FXS/DPO Jan 17 14:51:15 localhost kernel: Module 1: Installed -- AUTO FXS/DPO Jan 17 14:51:15 localhost kernel: Module 2: Installed -- AUTO FXO (FCC mode) Jan 17 14:51:15 localhost kernel: Module 3: Installed -- AUTO FXO (FCC mode)
Is the card going Bad. No Changes have been made to the Hardware and the Zaptel.conf is still the same as always
fxoks=1 fxoks=2 fxsks=3 fxsks=4 loadzone=us defaultzone=us
Zapata is still the same
context=from-pstn signalling=fxo_ks faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=1 channel=1
context=from-pstn signalling=fxo_ks faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=1 channel=2
context=from-pstn signalling=fxs_ks ;rxgain=10.5 ;txgain=-4.5 faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=0 channel=3
context=from-pstn signalling=fxs_ks faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=0 channel=4
Not sure if I need to send the card back or not.
Thanks for your consideration into this issue.
Ron
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
