That could be nice, however, there could be more traffic using tos 0x10. I wouldn't bet on using it in a config like this.
On Thu, 27 Jan 2005 15:32:44 -0800, Mike Machado <[EMAIL PROTECTED]> wrote: > You could also change the tos setting in sip.conf and use a rule similar > to the one found in the LARTC. This is a bit easier, and perhaps cleaner > than matching many ports. > > # tc filter add dev eth0 parent 1:0 prio 10 u32 \ > match ip tos 0x10 0xff \ > flowid 1:4 > > That would match TOS of 0x10, which is the "Low Delay" bit enabled. You > should change this to link to your appropriate flowid and parent node, > of course. > > > On Thu, 2005-01-27 at 16:39 -0600, [EMAIL PROTECTED] wrote: > > > > <snip> > > Does your script work for SIP too? Only for IAX? > > > > I'd like to put two of your bridges in my setup â one between the > > local LAN and the net, and the other at our branch office between the > > LAN and WAN there. > > > > But I need to be able to allow for sip to be QOSed, as we currently > > have an asterisk server at the remote office, and sip clients here. > > </snip> > > > > SIP can easily be added. I am placing IAX2 into high priority by port. > > You could do this with SIP as well. Add port 5060 and 10000-20000 to > > the high priority queue. This HOWTO is meant to be read before > > implementing it. My example includes shaping video and Citrix, which > > you may not be interested in doing. In that case you'll need to remove > > those priority levels. > > > > -Ron > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Jasper Spaans http://jsp.vs19.net/ _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
