Our * box is behind NAT with 4569 forwarded to it. I'm using stable 1-0 version. We're pure VoIP. Our SIP phones can use * to dial out, and can receive incoming calls, and conference in another SIP. However, if we try to conference 2 IAX connections together, we'll get one-way audio for one of the connected IAX devices. I found that this also happens if I use an IAXy to call out from * (outbound calls get bridged with teliax.com). The called party receives no audio, although I can hear them. Here's my iax.conf [general] secion. Should I change the bindaddr? I thought 0.0.0.0 just listened to everything, so that's why it did that. [general] port=4569 bindaddr=0.0.0.0 disallow=all allow=ulaw allow=alaw allow=gsm allow=g729 allow=g726 iaxcompat=yes bandwidth=high jitterbuffer=yes dropcount=3 maxjitterbuffer=500 maxexcessbuffer=300 tos=0x18 register => XXX:[EMAIL PROTECTED] IAX2 debug shows so much info I don't know where to start. I don't see any errors or warnings in the console though. TIA, -Ron _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
