There should be no quotes after the : in the cisco SIPmacaddress.cnf files. Change it from: # Line 1 line1_name: Scott line1_authname: "scott" line1_password: "scott"
# Line 2 line2_name: Scott1 line2_authname: "scott1" line2_password: "scott1" To: # Line 1 line1_name: Scott line1_authname:scott line1_password:scott # Line 2 line2_name: Scott1 line2_authname:scott1 line2_password:scott1 this works for me hope it works for you too. On Sat, 08 Jan 2005 02:38:00 +0800, Nathan Alberti <[EMAIL PROTECTED]> wrote: > Theres your problem right there; All of them say line2_X > > Nathan. > > > # Line 2 > line2_name: Scott1 > line2_authname: "scott1" > line2_password: "scott1" > > # Line 3 > line2_name: "Line 2" > line2_authname: "UNPROVISIONED" > line2_password: "UNPROVISIONED" > > # Line 4 > line2_name: "Line 4" > line2_authname: "UNPROVISIONED" > line2_password: "UNPROVISIONED" > > # Line 5 > line2_name: "Line 5" > line2_authname: "UNPROVISIONED" > line2_password: "UNPROVISIONED" > > # Line 6 > line2_name: "Line 6" > line2_authname: "UNPROVISIONED" > line2_password: "UNPROVISIONED" > > Scott Henderson wrote: > > > I set this up manually on the phone and it works just fine so config > > files ... I attached the complete config files so maybe someone can > > see what I am missing. > > > > ============ > > argon:/tftpboot# cat SIPDefault.cnf > > # SIP Default Generic Configuration File > > > > # Image Version > > image_version: P0S3-07-3-00 ; > > > > # Proxy Server > > proxy1_address: "192.168.17.13" ; Can be dotted IP or FQDN > > proxy2_address: "192.168.17.13" ; Can be dotted IP or FQDN > > proxy3_address: "192.168.17.13" ; Can be dotted IP or FQDN > > proxy4_address: "192.168.17.13" ; Can be dotted IP or FQDN > > proxy5_address: "192.168.17.13" ; Can be dotted IP or FQDN > > proxy6_address: "192.168.17.13" ; Can be dotted IP or FQDN > > > > # Proxy Server Port (default - 5060) > > proxy1_port: 5060 > > proxy2_port: 5060 > > proxy3_port: 5060 > > proxy4_port: 5060 > > proxy5_port: 5060 > > proxy6_port: 5060 > > > > # Proxy Registration (0-disable (default), 1-enable) > > proxy_register: 1 > > > > # Phone Registration Expiration [1-3932100 sec] (Default - 3600) > > timer_register_expires: 3600 > > > > # Codec for media stream (g711ulaw (default), g711alaw, g729a) > > preferred_codec: none > > > > # TOS bits in media stream [0-5] (Default - 5) > > tos_media: 5 > > > > # Inband DTMF Settings (0-disable, 1-enable (default)) > > dtmf_inband: 1 > > > > # Out of band DTMF Settings (none-disable, avt-avt enable (default), > > avt_always - always avt ) > > dtmf_outofband: avt > > > > # DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), > > 4-3db up, 5-6dB up) > > dtmf_db_level: 3 > > > > # SIP Timers > > timer_t1: 500 ; Default 500 msec > > timer_t2: 4000 ; Default 4 sec > > sip_retx: 10 ; Default 10 > > sip_invite_retx: 6 ; Default 6 > > timer_invite_expires: 180 ; Default 180 sec > > > > ####### New Parameters added in Release 2.0 ####### > > > > # Dialplan template (.xml format file relative to the TFTP root directory) > > dial_template: dialplan > > > > # TFTP Phone Specific Configuration File Directory > > tftp_cfg_dir: "" ; Example: ./sip_phone/ > > > > # Time Server (There are multiple values and configurations refer to > > Admin Guide for Specifics) > > sntp_server: "192.168.17.11" ; SNTP Server IP Address > > sntp_mode: directedbroadcast ; unicast, multicast, anycast, or > > directedbroadcast (default) > > time_zone: YST ; Time Zone Phone is in > > dst_offset: 1 ; Offset from Phone's time when DST is > > in effect > > dst_start_month: April ; Month in which DST starts > > dst_start_day: "" ; Day of month in which DST starts > > dst_start_day_of_week: Sun ; Day of week in which DST starts > > dst_start_week_of_month: 1 ; Week of month in which DST starts > > dst_start_time: 02 ; Time of day in which DST starts > > dst_stop_month: Oct ; Month in which DST stops > > dst_stop_day: "" ; Day of month in which DST stops > > dst_stop_day_of_week: Sunday ; Day of week in which DST stops > > dst_stop_week_of_month: 8 ; Week of month in which DST stops > > 8=last week of month > > dst_stop_time: 2 ; Time of day in which DST stops > > dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST > > automatic adjustment > > time_format_24hr: 0 ; Enable(1 - 24Hr Default)/Disable(0 - > > 12Hr) > > > > # Do Not Disturb Control (0-off, 1-on, 2-off with no user control, > > 3-on with no user control) > > dnd_control: 0 ; Default 0 (Do Not Disturb feature is > > off) > > > > # Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user > > control, 3-enabled no user control) > > callerid_blocking: 0 ; Default 0 (Disable sending all calls > > as anonymous) > > > > # Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user > > control, 3-enabled no user control) > > anonymous_call_block: 0 ; Default 0 (Disable blocking of > > anonymous calls) > > > > # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) > > dtmf_avt_payload: 101 ; Default 101 > > > > # Sync value of the phone used for remote reset > > sync: 1 ; Default 1 > > > > ####### New Parameters added in Release 2.1 ####### > > > > # Backup Proxy Support > > proxy_backup: "" ; Dotted IP of Backup Proxy > > proxy_backup_port: 5060 ; Backup Proxy port (default is 5060) > > > > # Emergency Proxy Support > > proxy_emergency: "" ; Dotted IP of Emergency Proxy > > proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060) > > > > # Configurable VAD option > > enable_vad: 0 ; VAD setting 0-disable (Default), > > 1-enable > > > > ####### New Parameters added in Release 2.2 ###### > > > > # NAT/Firewall Traversal > > nat_enable: 0 ; 0-Disabled (default), 1-Enabled > > nat_address: "" ; WAN IP address of NAT box (dotted IP > > or DNS A record only) > > voip_control_port: 5060 ; UDP port used for SIP messages > > (default - 5060) > > start_media_port: 16384 ; Start RTP range for media (default - > > 16384) > > end_media_port: 32766 ; End RTP range for media (default - > > 32766) > > nat_received_processing: 0 ; 0-Disabled (default), 1-Enabled > > > > # Outbound Proxy Support > > outbound_proxy: "" ; restricted to dotted IP or DNS A > > record only > > outbound_proxy_port: 5060 ; default is 5060 > > > > ####### New Parameter added in Release 3.0 ####### > > > > # Allow for the bridge on a 3way call to join remaining parties upon > > hangup > > cnf_join_enable : 1 ; 0-Disabled, 1-Enabled (default) > > > > ####### New Parameters added in Release 3.1 ####### > > > > # Allow Transfer to be completed while target phone is still ringing > > semi_attended_transfer: 1 ; 0-Disabled, 1-Enabled (default) > > > > # Telnet Level (enable or disable the ability to telnet into the phone) > > telnet_level: 1 ; 0-Disabled (default), 1-Enabled, > > 2-Privileged > > > > ####### New Parameters added in Release 4.0 ####### > > > > # XML URLs > > services_url: "" ; URL for external Phone Services > > directory_url: "" ; URL for external Directory location > > logo_url: "http://192.168.17.11/asterisk-tux.bmp"; ; URL for > > branding logo to be used on phone display > > > > # HTTP Proxy Support > > http_proxy_addr: "" ; Address of HTTP Proxy server > > http_proxy_port: 80 ; Port of HTTP Proxy Server (80-default) > > > > # Dynamic DNS/TFTP Support > > dyn_dns_addr_1: "" ; restricted to dotted IP > > dyn_dns_addr_2: "" ; restricted to dotted IP > > dyn_tftp_addr: "" ; restricted to dotted IP > > > > # Remote Party ID > > remote_party_id: 0 ; 0-Disabled (default), 1-Enabled > > > > ####### New Parameters added in Release 4.4 ####### > > > > # Call Hold Ringback (0-disabled, 1-enabled, 2-disabled no user > > control, 3-enabled no user control) > > call_hold_ringback: 0 ; Default 0 (Disable ringback of held > > call) > > > > ======================== > > argon:/tftpboot# cat SIP00115C407FA3.cnf > > # SIP Configuration Generic File > > > > # Line 1 > > line1_name: Scott > > line1_authname: "scott" > > line1_password: "scott" > > > > # Line 2 > > line2_name: Scott1 > > line2_authname: "scott1" > > line2_password: "scott1" > > > > # Line 3 > > line2_name: "Line 2" > > line2_authname: "UNPROVISIONED" > > line2_password: "UNPROVISIONED" > > > > # Line 4 > > line2_name: "Line 4" > > line2_authname: "UNPROVISIONED" > > line2_password: "UNPROVISIONED" > > > > # Line 5 > > line2_name: "Line 5" > > line2_authname: "UNPROVISIONED" > > line2_password: "UNPROVISIONED" > > > > # Line 6 > > line2_name: "Line 6" > > line2_authname: "UNPROVISIONED" > > line2_password: "UNPROVISIONED" > > > > ####### New Parameters added in Release 2.0 ####### > > > > # All user_parameters have been removed > > > > # Phone Label (Text desired to be displayed in upper right corner) > > phone_label: "" ; Has no effect on SIP messaging > > > > # Line 1 Display Name (Display name to use for SIP messaging) > > line1_displayname: "User ID" > > > > # Line 2 Display Name (Display name to use for SIP messaging) > > line2_displayname: "User ID" > > > > > > ####### New Parameters added in Release 3.0 ###### > > > > # Phone Prompt (The prompt that will be displayed on console and telnet) > > phone_prompt: "SIP Phone" ; Limited to 15 characters (Default - > > SIP Phone) > > > > # Phone Password (Password to be used for console or telnet login) > > phone_password: "cisco" ; Limited to 31 characters (Default - cisco) > > > > # User classifcation used when Registering [ none(default), phone, ip ] > > user_info: none > > > > messages_uri: "_6101" > > argon:/tftpboot# > > > > Nabeel Jafferali wrote: > > > >>>I had not looked at the phones settings yet, thanks for the > >>>suggestion. The setting indicate that there is no configuration on the > >>>second line it is listed as "UNPROVISIONED" > >>> > >>> > >> > >>Go into the phone and program Line 2 Settings directly, without using > >>the SIP<MAC>.cnf file. If that works, then your .cnf file is wrong. > >> > >> > >> > > > >-- > >Scott Henderson > >============================================================================ > >Finite Technologies Incorporated > >3763 Image Drive, Anchorage, Alaska 99504 > >Phone: 907.339.8085 ext 6101, Fax: 907.333.4482 > >http://www.finite-tech.com > >http://www.chillywall.com > >http://www.virtuale.cc > >http://www.mphage.com > >Current Local Time: http://www.worldtimeserver.com/time.asp?locationid=US-AK > >============================================================================ > > > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >Asterisk-Users mailing list > >[email protected] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
![http://192.168.17.11/asterisk-tux.bmp"](http://192.168.17.11/asterisk-tux.bmp"){kind=link}