I would play around with the DIALSTATUS variable: http://www.voip-info.org/wiki-Asterisk+variable+DIALSTATUS use noop(${DIALSTATUS}) and see what happens. Shalom Ubracha Vhatzlacha
On Thu, 30 Dec 2004 00:30:42 +0200, Warren Burstein <[EMAIL PROTECTED]> wrote: > The FXO lines on my TDM400 are connected to PSTN lines in Israel. As far as > I know, the lines around here have disconnect supervision (I've seen some > other Israelis on this list, anyone know for sure?), because it's worked on > Dialogic cards, which reported hangup, not busy detect (while when I connect > a Dialogic card to a PBX, I have to measure the busy signal's > frequency/cadence or it doesn't disconnect). I couldn't tell for sure - I > don't have a phone with a light, and the only voltmeters I have are digital, > no way to see if there is a drop to zero between the several volts when the > line is offhook to the 47 volts when it is onhook. > > But * would only recognize hangup if I unplugged the PSTN line. Otherwise > it would play my voicemail menu over and over if I hung up without choosing > an extension, good thing I put in a counter and did Hangup after a few > tries. > > So, I turned on busydetect, and now disconnect works (I was surprised that > it worked right away, I didn't even need to find out where the busy signal > is defined, maybe the busy here is the same or close enough to the US tone), > but I was wondering, is there any way I can get the console to let me know > whether it disconnected due to voltage drop or busy detection? > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
