Wow, that�s interesting information to know. I guess the lower power on the PSTN line causes the problem?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christian HOFFMANN Sent: Monday, December 20, 2004 12:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Problem with a TDM400 I just get the response from digium support, my FXS module is dead ! They says: "Anyways, if you plug a phone line into an FXS module and call that line, it will blow the FXS module up." So I'll have to replace it. Regards Le samedi 18 d�cembre 2004 � 09:23 -0600, Rich Adamson a �crit : > > I have a small system based on one TDM400 card with > > - 2 FXO modules for incoming lines > > - 1 FXS module for one phone > > > > The system was working fine in the past. The motherboard was exchanged > > and during the switch, the phones line was rewired with a mistake and a > > incoming phone line was connected to the FXS module, and there was > > ringing voltage on the module. > > > > Now, the system kinda works but the FXS module stays in state Rsrvd, no > > ringing, all the call goes directly to voice-mail (it's programmed this > > way in extensions.conf), no dial-tone on the phone. > > > > Is my FXS module dead ? > > > Freshmaker passed register test > > Module 0: Installed -- AUTO FXO (FCC mode) > > Module 1: Installed -- AUTO FXO (FCC mode) > > Module 2: Installed -- AUTO FXS/DPO > > Module 3: Not installed > > > Power alarm on module 3, resetting! > > That would be my guess. Looking at the specs for the Silicon Labs chips > used on the modules, I would have guessed the module would have been > protected from ringing voltage. But, who knows for sure. > > Might try calling digium support to see what they think. > > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
