Muhammed
----- Original Message ----- From: "Muhammad Talha" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]>
Sent: Monday, December 20, 2004 10:03 AM
Subject: Re: [Asterisk-Users] Zaphfc/BRI Configuration help
Thanks lan
i have chnaged signalling = bri_cpe_ptmp
also try changing pridialplan
but with no luck . ztcfg -vv shows 2 channels are ok but i get no debugg output related to Zap channel
i think problem may be in zaptel.conf
any ideas
I have only just got the TE side working myself and I am still trying to get NT working. - I have two cards with the first one being TE and the second (when it works) NT
My zaptel.conf is:-
# hfc-s pci a span definition # most of the values should be bogus because we are not really zaptel loadzone=nl defaultzone=nl
span=1,1,3,ccs,ami bchan=1-2 dchan=3
span=2,1,3,ccs,ami bchan=4-5 dchan=6
and my zapata.conf is... ; ; Zapata telephony interface ; ; Configuration file
[channels] ; ; Default language ; language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode signalling = bri_cpe_ptmp
; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net
pridialplan=unknown prilocaldialplan=local ; trust user provided callerid (clip no screening)? pritrustusercid = yes
echocancel=yes immediate=no group = 1 context=incoming channel => 1-2 signalling = bri_net_ptmp pridialplan=national group=2 contect=incoming channel => 4-5
When I run ztcfg I see the following in /var/log/messages
Dec 18 07:27:17 intechdial kernel: Zapata Telephony Interface Registered on major 196
Dec 18 07:27:17 intechdial kernel: zaphfc: no version for "zt_receive" found: kernel tainted.
Dec 18 07:27:17 intechdial kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5
Dec 18 07:27:17 intechdial kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xa168400 fifo 0x4fe8000(0x2fe8000) IRQ 5 HZ 1000
Dec 18 07:27:17 intechdial kernel: zaphfc: Card 0 configured for TE mode
Dec 18 07:27:17 intechdial kernel: ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 10 (level, low) -> IRQ 10
Dec 18 07:27:17 intechdial kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xa188800 fifo 0x4878000(0x2878000) IRQ 10 HZ 1000
Dec 18 07:27:17 intechdial kernel: zaphfc: Card 1 configured for NT mode
Dec 18 07:27:17 intechdial kernel: zaphfc: 2 hfc-pci card(s) in this box.
Dec 18 07:32:26 intechdial kernel: Registered tone zone 3 (Netherlands)
Dec 18 07:32:31 intechdial kernel: zaphfc: empty HDLC frame received.
Is that any help? :-)
Ian
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
