hello, using a legacy PBX to access a Asterisk Zap channel (Legacy PBX FXS --> FXO application Asterisk/TDM400P) I want to be able to "flash" the asterisk pbx. However by pressing the FLASH button on the extension connected to the Legacy PBX gets me the flash features on the Legacy PBX, not on the Asterisk PBX side. I thought of using the following codes (listed below) from
http://www.voip-info.org/wiki-Asterisk+zap+channels but, when i dialled from the extension (legacy pbx) --> extension of Asterisk pbx -> zaptel/zap channel -> IVR, and pressed "*0", it was invalid extension. How can I pass on a 'flash' key / command so that I can flash the remote side instead of the local side ? -samudra Built-in Extension Numbers There are some "extension numbers" that are built into the Zap channel module. You may override these in your Dialplan, i.e. these are used only if the number dialed does not match any of your Dialplan extension patterns. *0 Send hook flash *67 Disable Caller ID *69 Say last caller's Caller ID ("call return") *70 Disable call waiting *72 Activate "call forward immediate" *73 Deactivate "call forward immediate" *78 Enable "Do Not Disturb" *79 Disable "Do Not Disturb" *80 Add last caller's caller ID to blacklist *82 Enable Caller ID (only if disabled with *67) In addition, there are other codes that are not specific to the Zap channel module: *8# Callgroup pickup --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.804 / Virus Database: 546 - Release Date: 12/1/2004 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
