|
Hello, I’ve just set up SIP with asterisk using
this how-to: http://www.automated.it/guidetoasterisk.htm#_Toc49248757
but when I try calling the number at my SIP provider (Wx3) it doesn’t
come thru. I THINK I registered to my SIP provider without any problem, in
sip.conf I do: register => My.name:passwd:[EMAIL PROTECTED]/12345678 If I change the password to something else I get an
registration error when doing asterisk / reload so I guess the registration
went ok the first time then when there’s no error message? I also added 2
phones to asterisk: Cisco IP-phone 7960. I GUESS it was registered successfully
because I got errors at first because username was wrong and when I changed it
to correct values – no errors. “sip show peers” is showing my phones: Name/username
Host Dyn Nat
ACL
Mask
Port Status cisco2/cisco2 213.1.1.1
D 255.255.255.255
5060 Unmonitored cisco1/cisco1 213.1.1.1
D 255.255.255.255
5060 Unmonitored wx3.se
213.1.1.1
255.255.255.255 5060 Unmonitored 3 sip peers loaded [3 online , 0 offline] Though host for wx3.se is showing the wrong IP above. How can I debug this? Below is what I’ve added to my config-files. Sip.conf [general] context=mycontext register => My.name:passwd:[EMAIL PROTECTED]/XXXXXXXXX [wx3.se] type=peer fromuser=username-here secret=pass fromdomain=wx3.se [cisco1] type=friend host=dynamic defaultip=192.111.111.111 username=cisco1 secret=mypass dtmfmode=rfc2833 ; Choices are inband, rfc2833, or
info ;mailbox=1000 ; Mailbox for message waiting indicator context=mycontext callerid="MyUser 1" <9053> [cisco2] (almost identical) in extensions.conf: [mycontext] exten => 1,1,Dial(SIP/cisco1,20,tr) exten => 2,1,Dial(SIP/cisco2,20,tr) exten =>
12345678,1,Dial(SIP/cisco1&SIP/cisco2,20,tr |
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
