Hi -
We're moving up in the world to a PRI (Verizon), and I'm having some problems with it. I'm new to this PRI thing, though, so maybe I've just screwed up a simple config detail. I've got a TE410P on a Dell PE1600SC (ServerWorks Chipset). The card itself has a green light for the PRI, and Zttool shows Span1 as "OK". All I'm getting when I call into any of the pri lines, though, is a slow busy. I can't see anything from the asterisk end - it looks as though I'm not calling. When I call out, I just get a fast busy congestion tone, and asterisk says all the channels are busy:
*CLI> pri debug span 1
Enabled debugging on span 1
-- Executing Dial("SIP/2000-28df", "Zap/2/19142246402") in new stack
Dec 14 21:01:52 NOTICE[1437]: app_dial.c:800 dial_exec: Unable to create channel of type 'Zap' (cause 0)
== Everyone is busy/congested at this time
-- Executing Congestion("SIP/2000-28df", "") in new stack
== Spawn extension (from-sip, 19142246402, 2) exited non-zero on 'SIP/2000-28df'
Here are my configs for the TE410P: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24
zapata.conf: switchtype = national context = incoming signalling = pri_cpe group = 1 channel => 1-23
Have I screwed up the config, or do I need to bug Verizon?
Thanks, Noah
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
