My problem with this phone is I cannot get to the settings to change anything. This is a used phone, but new to me. I have not had it in service yet.
None of the buttons on the phone seem to do anything. I assume I have to configure the phone TFTP settings so I can upgrade to the SIP Image and the new configuration settings. When I upgraded my 7905 phones, I entered the TFTP settings from the phone's display, then upgraded thru the TFTP. I assume I do the samething with the 7960, but with the 7960 SIP Image (Yes I do have the 7960 SIP Image, also I did not try and use the 7905 SIP Image). I do have the 7960 SIP Image, but I can't get into the phone to change the TFTP. Is the phone locked? Did the previous owner mess up an upgrade and now the phone is a paper weight? This is my first attempt working with a 7960 phone. Thanks, Randy -----Original Message----- From: Asterisk [mailto:[EMAIL PROTECTED] Sent: Saturday, December 11, 2004 11:29 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Cisco 7960 says "Protocol Application Invalid?" I had this a couple of days ago .. Randy MacKay wrote: > I have been able to upgrade my Cisco 7905G phones to the SIP Image without > any problems, but I just got a 7960, and I can't seem to get to the settings > so I can upgrade to a SIP Image. > > When the phone boots up, it says Configuring VLAN, Configuring IP, TFTP > ????..., then Protocol Application Invalid. When I got this, it was due to the fact that I had incorrect network settings in the SIPDefault.cnf file, and was pointing to the wrong * server, the wrong tftp server etc etc. Also check that the image file specified in the SIPDefault SIP<mac address>.cnf file is the correct image as well. HTH Julian > > I noticed on the wiki page "Firmware issues on 7940 - 7960" > http://www.voip-info.org/tiki-index.php?page=Firmware%20issues%20on%207940%2 > 0-%207960#comments it has some xml script. Can I use that script to fix my > phone? If so, how do I go about it? > > I can't seem to get to the settings to direct it to my TFTP. > > Any help would be appreciated. > > Randy MacKay > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.803 / Virus Database: 546 - Release Date: 11/30/2004 > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.803 / Virus Database: 546 - Release Date: 11/30/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.803 / Virus Database: 546 - Release Date: 11/30/2004 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
