Hi, Thanks for the help. I actually needed to get stuff ready quick and installed Suse9.1 instead.
Regards, - Ashish On Sat, 27 Nov 2004 09:03:15 +0800, Ronald Wiplinger <[EMAIL PROTECTED]> wrote: > Ashish Shinde wrote: > > > > >Hi, > > I have two WCT100P cards installed on a suse 9.0 box. Installation > >for Zaptel complains of some unresolved dependencies. The zaptel and > >wct1xxp modules load without any errors. ztcfg give no problems. > > > > The problem is when I start asterisk I get the following error and > >asterisk shuts down > > > >----------------------------------------------------------------------------------------------------- > >Nov 24 21:28:15 WARNING[18825]: chan_zap.c:765 zt_open: Unable to > >specify channel 1: No such device or address > >Nov 24 21:28:15 ERROR[18825]: chan_zap.c:6195 mkintf: Unable to open > >channel 1: No such device or address > >here = 0, tmp->channel = 1, channel = 1 > >Nov 24 21:28:15 ERROR[18825]: chan_zap.c:9139 setup_zap: Unable to > >register channel '1-23' > >Nov 24 21:28:15 WARNING[18825]: loader.c:334 ast_load_resource: > >chan_zap.so: load_module failed, returning -1 > > == Unregistered channel type 'Tor' > > == Unregistered channel type 'Zap' > >Nov 24 21:28:15 WARNING[18825]: loader.c:429 load_modules: Loading > >module chan_zap.so failed! > >---------------------------------------------------------------------------------------------------- > > > > > > > I had a similar problem, but I could solve it by: > > cd /usr/src/linux > make cloneconfig && make dep > > and continued with: > cd /usr/local/src/asterisk/zaptel/ > make clean > make install > > > > > > My /etc/zaptel.conf file reads > > > > loadzone=us > > defaultzone=us > > span=1,0,0,d4,b8zs > > bchan=1-23 > > dchan=24 > > > > span=2,0,0,d4,b8zs > > bchan=25-47 > > dchan=48 > > > > The /etc/asterisk/zapata.conf reads > > context = default > > switchtype = national > > signalling = pri_cpe > > group = 1 > > channel => 1-23 > > > > context = default > > switchtype = national > > signalling = pri_cpe > > group = 2 > > channel => 25-47 > > > > I don't know if it is some configuration error, or some problem with > >zaptel and suse9.0. > > I would really be grateful if someone could help me in this regards. > > > >Thanks and regards, > > - Ashish Shinde > >_______________________________________________ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > -- > Ronald Wiplinger (CEO of ELMIT) > http://www.elmit.com +886 (0) 939--77-55-16 > - I'm a SpamCon Foundation Member, #694, Verify it at http://www.spamcon.org > > PS: Spam prevention! > Our system is protected with a spam prevention program. > If you send us an e-mail, our system will send you a confirmation message > back. Just reply to this confirmation message please. > After receiving this confirmation message, our system will send the hold > message (one) and all future messages (after the received confirmation > message) to me without asking you again. > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
