> > > > How can i get asterisk to still load, after a module has failed to load. > > > > Can i skip over some modules. > > > > > > Depends on the module. Some modules are very important and can't be > > > skipped. If it is not a module you care about, in the modules.conf, put > > > a noload=module_name into the file and you will get asterisk to skip > > > over it. I think it is important to do that for VoIP modules not in use > > > as it also cuts down on potential exploit in routes. > > > > what do you mean with "I think it is important to do that for VoIP modules > > not in use as it also cuts down on potential exploit in routes." > > Exactly what was said. But for those with out the networking background, > any open network port has the potential to be exploited. Mark and all do > their very best to make sure the code is tight and clean. So if you turn > off the VoIP modules not being used, you don't open up more ports to > potentially be compromised.
And, not only the port issue but there obviously are a boat load of folks that don't understand default contexts that result in exposures that can be compromised. Would be kind of interesting to do a slow scan of all internet IP's looking for udp 5060 & 4569 though. :) Rich _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
