Re: [Asterisk-Users] NAT with Linksys

[David Filion]

Mark Phillips wrote:
Do you have nat=yes in your relevant sip.conf stanza?
 

I would look for an option that is "Block WAN Requests"  Set this to
disable, then your linksys will respond to pings. Hope this helps.
JB
----- Original Message -----
From: "Nahuel Alejandro Ramos" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[EMAIL PROTECTED]>
Sent: Thursday, November 04, 2004 1:30 PM
Subject: [Asterisk-Users] NAT with Linksys
   

Hi,
 I am living a wear thing. I am using my asterisk with all kind of
NAT / PAT / NPAT, with multiple ports on the same network address and
all works perfect.
 The problem I have been trying to solve is with a Cisco ATA behind a
Linksys NAT. The ATA's register work ok, but when I execute "sip show
peers" on the CLI I get a UNREACHABLE at the status column, and when I
try to call it, the asterisk send me to his voicemail because is
unreachable. But when the ATAs dial, the call work great.
 I have other ATAs behind other NATs (f.e. iptables) and they work
     

perfectly.
   

 I have tried using the DMZ option on my linksys (putting the ATA
private IP) but I stay having the problem.
 Could anyone give me a guide to search for a solution. I have been
googleing but I could not find a solution.
 Thank you very much.
       Nahuel Ramos.
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users
     

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users
   


G7LTT/KC2ENI
Mark Phillips
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 

If you're really adventurous you could also change your firmware from 
the default to the one from sveasoft.
It corrected my problems when I couldn't get the Linksys firmware to 
play nice.

David

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users