|
Hi ALL
After trying that syntax I still have the same problem, one thing is very strange is the number that Asterisk reports as the incoming. My ESN´s numbers are 219898334 and 219898335 but on the console I see 219898334,1 and 219898335,1
Incoming calls are working as you see bellow but on the third example you see what´s appening . Can you give me some ideias were to look, I feel I´m close to solve this but...
THIS IS MY LINE 0 WITH ESN NUMBER 219898334 RECEIVING A NORMAL CALL
== Starting Modem[i4l]/ttyI0 at incoming,219898334,1 failed so falling back to exten 's'
-- Executing Answer("Modem[i4l]/ttyI0", "") in new stack
-- Executing Dial("Modem[i4l]/ttyI0", "SIP/21|10") in new stack
-- Called 21
-- SIP/21-51ca is ringing
-- SIP/21-51ca answered Modem[i4l]/ttyI0
== Spawn extension (incoming, s, 2) exited non-zero on 'Modem[i4l]/ttyI0'
-- Hungup 'Modem[i4l]/ttyI0'
linuxpbx*CLI>
THIS IS MY LINE 1 WITH ESN NUMBER 219898335 RECEIVING A NORMAL CALL
== Starting Modem[i4l]/ttyI0 at incoming,219898335,1 failed so falling back to exten 's'
-- Executing Answer("Modem[i4l]/ttyI0", "") in new stack
-- Executing Dial("Modem[i4l]/ttyI0", "SIP/21|10") in new stack
-- Called 21
-- SIP/21-0d8e is ringing
-- SIP/21-0d8e answered Modem[i4l]/ttyI0
== Spawn extension (incoming, s, 2) exited non-zero on 'Modem[i4l]/ttyI0'
-- Hungup 'Modem[i4l]/ttyI0'
THIS IS AN OUTGOING CALL TRY TO NUMBER 213570150 MY DIALPLAN REQUIRES 9 to go outside
-- Executing Dial("SIP/21-68ef", "Modem/g1/9213570150||tr") in new stack
Nov 3 18:32:43 WARNING[1110502320]: chan_modem.c:191 modem_call: Destination g1 /9213570150 requres a real destination (device:destination)
-- Couldn't call g1/9213570150
-- Hungup 'Modem[i4l]/ttyI1'
== Everyone is busy/congested at this time
Nov 3 18:32:53 WARNING[1110502320]: pbx.c:1933 ast_pbx_run: Timeout, but no rul e 't' in context 'local-access'
OR
*CLI> -- Executing Dial("SIP/21-9da8", "Modem/g1/9213570150||tr") in new stack
Nov 3 18:37:35 WARNING[1110502320]: chan_modem.c:191 modem_call: Destination g1/9213570150 requres a real destination (device:destination)
-- Couldn't call g1/9213570150
-- Hungup 'Modem[i4l]/ttyI1'
== Everyone is busy/congested at this time
Nov 3 18:37:45 WARNING[1110502320]: pbx.c:1933 ast_pbx_run: Timeout, but no rule 't' in context 'local-access'
-- Saved useragent "SJLabs-SJphone/1.30.248" for peer 21
Thanks in advance
>>>Mark Elkins <[EMAIL PROTECTED]> 11/03 1:57 am >>>
On Tue, 2004-11-02 at 20:40 +0000, Paulo Adriano wrote:
>I need some help from you. Ím using Isdn4linux with Asterisk and
>incoming calls are working but anytime I whant to make an outgoing
>call I get this message.
All this is in extensions.conf
With ISDN4Linux, I defined the variable...
TRUNK=Modem/g1
Its used in an outgoing call as....
exten => _0.,1,Dial(${TRUNK}:${EXTEN:${TRUNKMSD}}||tr)
Note the ':' instead of a '/'
This seems to be used for the i4l driver where as the same line using
Digium equipment looks like...
exten => _0.,2,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}||tr)
Changes...
-- Executing Dial("Modem[i4l]/ttyI0", "Modem/g1/918708798") in new stack
to...
-- Executing Dial("Modem[i4l]/ttyI0", "Modem/g1:918708798") in new stack
--
. . ___. .__ Posix Systems - Sth Africa
/| /| / /__ [EMAIL PROTECTED] - Mark J Elkins, Cisco CCIE
/ |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
