HengWee Chin wrote:Hi,
I am having problem with the fxs port. I have compiled the zaptel, zapata and asterisk version 1.0.1. But after I start asterisk, I do not hear any dial tone coming on the fxs port. I am not able to dial out too.
Perhaps you could post your zaptel.conf and zapata.conf settings. Most likely there's something mixed up somewhere.
Are the modules loaded correctly? Which card are you using?
Flynn
Thanks Flynn,
I have narrow it down to be the PCI slot. Because if I was to move the TDM400P card to another slot, I will not have any problem. The system that I am currently working on is a 5 5-volt PCI slot motherboard. For some reasons, the PCI slot 1 and 2 gives me problem. I have checked the interrupts, for slot 1 and slot 2 they have dedicated interrupts that is not shared. I even tried to change the interrupts via cmos. Nothings seems to work. Perhaps it is something wrong with the motherboard or the slot. The strange thing is that, zaptel is able to detect the port on slot 1 and 2. Just that I cannot heard any dial tone on the FXS port.
I would like to know is there anyone have any success stories getting asterisk up and running on a 5 5-volt PCI slot using system. If possible, can share the brand and model of the motherboard.
Regards, Chin
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
