Cirelle Enterprises wrote:
----- Original Message ----- From: "Steve Underwood" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[EMAIL PROTECTED]>
Sent: Monday, October 25, 2004 10:28 AM
Subject: Re: [Asterisk-Users] Digium Wildcard T1 Compatibility
| >
| >zaptel.conf:
| >span=1,1,5,esf,b8zs
| >nethdlc=1-24
| >loadzone = us
| >defaultzone=us
| >
| >
| >zapata.conf
| >switchtype = national
| >signalling = pri_cpe
| >loadzone=us
| >defaultzone=us
| > | >
| If you want to use the whole T1 for HDLC, why have you configured it as | an ISDN PRI line?
| | Steve
|
from what I understand zapata.conf only comes into play when asterisk
is running. According to digium, the only config that matters for hdlc is
the zaptel.conf. In this case asterisk is not running.
Er, yeah, shouldn't post while half asleep :-)
Steve
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
