<snip> >RJ48C is *not* standard ethernet cable. The twisted pairs are grouped differently. Ethernet cables work OK for T1s if they are only 2 or 3 metres long. Long ethernet cables give high error rates when used for T1s.
Regards, Steve <snip> I have run several robbed-bit(non-PRI) T1s on standard CAT5e ethernet cable for runs of over 100 feet(30 meters) and have seen no increase in the error rate of the T1s. I've done this for years, and even the telco install techs say it really doesn't matter especially if you are running robbed-bit, supposedly its more forgiving than PRIs are. MATT--- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
