el Flynn wrote: > Hi all, > > Just wanted to see what you guys have to say about the setup we're > planning to install - 16 incoming POTS lines, 50 extensions. As it is, > I've got two options: > > 1) Lots of ATAs > 1 x * server > 4 x TDM04B for 16 incoming lines (can't do fractional E1 - client's > requirements) > 25 x Sipura SPA-2000 connected to a total of 50 analog phones
option 2 but with 3 channel banks one with fxo ports for the pots lines. 4 TDM04B could be a problem. and I would use one TE410p board instead of 3 T100p. > 2) Channel banks > 2 x * servers (due to PCI slot limitations...) > 4 x TDM04B (as above) > 2 x T100P > 2 x 24-port channel bank > 1 x Sipura SPA-2000 connected to 2 analog phones > > Option #1 is cheaper but (i suppose) more hassles in terms of > SIP.conf, wall warts etc. > > Option #2 is more expensive (for me anyways) but more manageable (?) > I'm leaning more towards this but am concerned about costs. > > Anyone can provide hints, suggestions, comments as to why I would > choose one option over the other? I _can't_ do anything about costs, > due to certain licensing and legal issues here in my country, so > suggestions like "buy 'em from eBay and save cost" won't do any good > :) > > cheers, > flynn > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
