[EMAIL PROTECTED] wrote:
Hi! I'm having a problem getting a channelized T1 to signal correctly
with a Nortel DMS 500. I've got a 2-way trunk group set up with E&M
Wink start connected to Asterisk on channel 1 of a T400P card. I'm
pretty sure the configs are correct (listed below) but when the Northern
winks to Asterisk, Asterisk is not returning the wink. Has anyone set
up this configuration who could possibly see an error on my part?
Thanks!
chris
______________________
zaptel.conf
span=1,1,0,esf,b8zs
if you are using e&m wink on the nortel are you sure it shouldn't
be d4,ami
span=2,1,0,esf,b8zs
span=3,1,0,esf,b8zs
span=4,1,0,esf,b8zs
why are these 3 suppling timing? they aren't connected to
anything (hense the zapata.conf below)
e&m=1-24
since you aren't using the others you should have
unused=25-96
loadzone=us
defaultzone=us
______________________
zapata.conf
[channels]
context=tester
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
aren't you going to need callprogress=yes (e&m = ear and mouth,
else how do you expect to get any progress info?)
threewaycalling=yes
tranfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
ragain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
signalling=em_w
group=1
channel=1-24
______________________
extensions.conf
[tester]
exten => _1NXXNXXXXXX,1,Dial(Zap/g1/${EXTEN:1},60,)
exten => _1NXXNXXXXXX,102,Busy
exten => _1NXXNXXXXXX,2,Congestion
i hope this helps.
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
