Alright, I'd like to start out by saying that this is just a proof of concept. The final configuration will include the purchase of a couple of TDM400P's so all flames for using cheap Winmodems please divert yourselves to /dev/null and don't waste my bandwidth or your time responding.
I've noticed that all documentation online talks about how to configure a single x100p (or generic) in /etc/zaptel.conf and /etc/asterisk/zapata.conf. My question is I need to use two for a proof of concept at work. I have a lot of experience with a purely voip (voicepulse, voipjet, fwd, and iaxtel) so I feel I understand asterisk's flow and configuration really well. My question is, for using two x100p's are there any changes that need to happen from the basic x100p config I've seen online. Here's what I'm using: /etc/zaptel.conf defaultzone=us fxsks=1 /etc/asterisk/zapata.conf signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes echotraining=400 callerid=asreceived group=1 context=recieved channel => 1 Examples would be appreciated. Thanks, Erik _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
