Old SPA-3000 firmware versions had issues with bad echo when raising
txgains, apparently it has been greatly reduced, if not fixed in the
latest firmware.
Volume/echo was always an issue on my X100P's, but since I switched to
the SPA-3000, the volume is _much_ higher with next to zero echo.
2.0.10f:
21. Improved echo suppressor for FXO port in presence of strong echo
2.0.10d:
17. Improved FXO ECAN to auto-compensate for large <SPA to PSTN gain> and
<PSTN to SPA gain> settings (so that large gain wil not lead to
larger echo)
On Sun, 2004-10-10 at 12:16 -0700, Randy Bush wrote:
> >> With mine no echo problem, but the sound level is very low... :/
> >> You have to speak higher to be heard...
> > Raise the TxGain setting on the SPA.
>
> and get echo
>
> randy
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Mike Benoit <[EMAIL PROTECTED]>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
