Hello, I have the following configuration : E100P -> * -> TDM400 -> Modem
When I receive FAXes, about 20% of them are corrupted : pages are not always complete. If the fax is complex or with numerous pages, it's usually a mess. Before that, I was using spandsp with success. Unfortunately it's too picky with some broken fax (training failed). Since this failure only occurs with the same set of faxes and it's reproducible, I'm confident about my E100P configuration. That's why I suspect frame slips on the TDM400 side. How can I solve this issue ? It's a dual p3, highly idle without IRQ sharing : 20: 602869735 602487558 IO-APIC-level wctdm 21: 602485799 602863515 IO-APIC-level t1xxp zaptel.conf : span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 fxoks=32-35 zapata.conf : [channels] faxdetect=incoming context=default switchtype=euroisdn signalling=fxo_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=no echocancelwhenbridged=no rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no signalling=pri_cpe context=incoming channel => 1-15,17-31 signalling=fxo_ks context=internal channel => 32-33 Thanks, -- Carl _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
