On Thu, 16 Sep 2004 16:12:10 -0700 (PDT), [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Could anyone with any experience with * over a non-PRI T1 help this newbie? > I have a fractional T1 that is working fine through a channel bank, but I > can't get any response on * using a T400P. My analog line and the extensions > work fine, but the T400P port 1 shows a red led (what exactly does that tell > me?). I brought up zttool which shows a condition red also, but ztcfg shows > nothing amiss. There is no change when I unplug the cable to the T1 or > re-insert it. When I load * it gives no error messages, at least none that > appear to be such to me. I've looked thru all the related wiki info that I > can find but I'm stumped.
On my E100P, a flashing red LED meant that there was no connection to the ISDN. When I switched the cable to a proper E1 cross over cable, everything was fine. Regards, Craig. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
