US/Canada caller id can be forwarded between FXO to FXS devices. On call waiting, I believe you need this: When I'm on my FXS and need to flash the FXO device, I do flash then *0 on my phone. Works like a charm for me, I use an asterisk behind another PBX, so when I need to transfer a call coming from the other PBX to another extension on the same PBX, I do flash, *0 then dial the extension number on the other PBX I need to transfer to.
Marcelo Em Seg 13 Set 2004 15:09, Andrew escreveu: > Folks: > > I'd like to install Asterisk for use in my home. However, I'd like to > continue using wireless phones in a couple of locations. The cheapest way > to do this is to continue to use analog phone devices via an FXO/FXS box. > However, I am not clear on whether I can expect these devices to provide > "call waiting" features and caller ID features to the connected analog > phone. Ideally I would use one of the cheaper devices such as that > available from www.pcphoneline.com > > Any clues? > > A. > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
