Thanks for the quick response, William. Yes, I was able to force it by removing ULAW from the sip.conf but I needed that in there. If it is there, then the Sipura as well as X-PRO use ulaw. I didn't really want to adjust the clients because I am planning on having random clients accessing the server and don't want to instruct each one to change whatever hard or softphone they may have over to g729. I wanted that process transparent to the user. I also seem to need more than 2 licenses although the Sipura support g729, so I wouldn't think I would also need a license on the Asterisk box for each one. It looks like the choices are either use a dedicated box only for conferencing and eliminate the possiblity of anyone using ulaw, or just getting more bandwidth so that there is enough for as the 20 clients can connect. Just seems like a lot of bandwidth to have, that's all. The ideal situation would be the ability to only use g729 for the conference rooms and ulaw for everything else, but the bandwidth=low setting doesn't seem to work if ulaw is allowed. Thanks again.
________________________________ From: [EMAIL PROTECTED] on behalf of William Suffill Sent: Mon 9/6/2004 00:35 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Asterisk Conferencing using g729 Roger, I haven't had any problems doing confs w/ g729. My guess is the Sipura is asking for ulaw first. Try adjusting the codec priority on the sipura side. IF you still have problems I an get my spa-3000 out and trying and solve it for you. -- William ----- Original Message ----- From: box100 <[EMAIL PROTECTED]> Date: Mon, 6 Sep 2004 00:28:50 -0400 Subject: [Asterisk-Users] Asterisk Conferencing using g729 To: [EMAIL PROTECTED] Could anyone who has successfully configured Asterisk to use g729 to conference 10-20 people please post their configs. I purchased and successfully installed 2 g729 licenses and but when I dial into my conference number on the Asterisk box from a SPA-2000 set to allow all codecs, it always appears to connect using ULAW. My iax.conf file includes the following under the general section disallow=all bandwidth=low allow=g729 allow=ulaw Thanks, Roger Easlick _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
<<winmail.dat>>
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
