This is my PRI Debug
info for those interested in this problem:
PMDBRIDGE*CLI>
< Protocol Discriminator: Q.931 (8) len=39
< Call Ref: len= 2 (reference 115/0x73) (Originator)
< Message type: SETUP (5)
< [04 03 90 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: 3.1kHz audio (16)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< Ext: 1 User information layer 1: u-Law (34)
< [18 03 a9 83 83]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 3 ]
< [1e 02 81 83]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
< Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
< [6c 0b a1 39 37 32 33 31 35 38 35 34 31]
< Calling Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation permitted, user number not screened (0) '8541' ]
< [70 05 a1 32 36 38 38]
< Called Number (len= 7) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2688' ]
-- Making new call for cr 115
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 30 (cs0, Progress Indicator)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
> Protocol Discriminator: Q.931 (8) len=14
> Call Ref: len= 2 (reference 32883/0x8073) (Terminator)
> Message type: SETUP ACKNOWLEDGE (13)
> [18 03 a9 83 83]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 3 ]
> [1e 02 81 82]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
-- Accepting call from '8541' to '2688' on channel 0/3, span 1
-- Executing Wait("Zap/3-1", "2") in new stack
< Protocol Discriminator: Q.931 (8) len=13
< Call Ref: len= 2 (reference 115/0x73) (Originator)
< Message type: STATUS (125)
< [08 03 80 e1 0d]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0)
< Ext: 1 Cause: Message type nonexist. (97), class = Protocol Error (6) ]
< Cause data 1: 0d (13)
< [14 01 01]I>
< Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Call Initiated (1)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
-- Executing Answer("Zap/3-1", "") in new stack
> Protocol Discriminator: Q.931 (8) len=14
> Call Ref: len= 2 (reference 32883/0x8073) (Terminator)
> Message type: CONNECT (7)
> [18 03 a9 83 83]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 3 ]
> [1e 02 81 82]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
-- Executing MeetMe("Zap/3-1", "|Mps") in new stack
-- Playing 'conf-getconfno' (language 'en')
PMDBRIDGE*CLI> pri
debug intense no show
PMDBRIDGE*CLI> pri no debug span 1
Disabled debugging on span 1
-- Playing 'conf-getconfno' (language 'en')
< Protocol Discriminator: Q.931 (8) len=39
< Call Ref: len= 2 (reference 115/0x73) (Originator)
< Message type: SETUP (5)
< [04 03 90 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: 3.1kHz audio (16)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< Ext: 1 User information layer 1: u-Law (34)
< [18 03 a9 83 83]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 3 ]
< [1e 02 81 83]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
< Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
< [6c 0b a1 39 37 32 33 31 35 38 35 34 31]
< Calling Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation permitted, user number not screened (0) '8541' ]
< [70 05 a1 32 36 38 38]
< Called Number (len= 7) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2688' ]
-- Making new call for cr 115
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 30 (cs0, Progress Indicator)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
> Protocol Discriminator: Q.931 (8) len=14
> Call Ref: len= 2 (reference 32883/0x8073) (Terminator)
> Message type: SETUP ACKNOWLEDGE (13)
> [18 03 a9 83 83]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 3 ]
> [1e 02 81 82]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
-- Accepting call from '8541' to '2688' on channel 0/3, span 1
-- Executing Wait("Zap/3-1", "2") in new stack
< Protocol Discriminator: Q.931 (8) len=13
< Call Ref: len= 2 (reference 115/0x73) (Originator)
< Message type: STATUS (125)
< [08 03 80 e1 0d]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0)
< Ext: 1 Cause: Message type nonexist. (97), class = Protocol Error (6) ]
< Cause data 1: 0d (13)
< [14 01 01]I>
< Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Call Initiated (1)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
-- Executing Answer("Zap/3-1", "") in new stack
> Protocol Discriminator: Q.931 (8) len=14
> Call Ref: len= 2 (reference 32883/0x8073) (Terminator)
> Message type: CONNECT (7)
> [18 03 a9 83 83]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 3 ]
> [1e 02 81 82]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
-- Executing MeetMe("Zap/3-1", "|Mps") in new stack
-- Playing 'conf-getconfno' (language 'en')
PMDBRIDGE*CLI> pri
debug intense no show
PMDBRIDGE*CLI> pri no debug span 1
Disabled debugging on span 1
-- Playing 'conf-getconfno' (language 'en')
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Shields
Sent: Sunday, August 29, 2004 3:42 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] not getting ringing/busy/answer feedback on my PRI
I posted a
problem earlier thinking it was due to a lack of sound card. Several
members stated that you do not need a sound card to play audio to a PRI
channel. I did some further testing and discovered that there is a problem
with call progress tones or signaling on my PRI. I think that
the reason I am not hearing audio from the MeetMe() or Playback() apps. is
because the the calling side of the PRI (NEC IPX), is not seeing the Answer
signal. I believe it is waiting for a ring and/or
answer condition even after Asterisk has executed an Answer() and
Playback().
The only other
problem that I am having with my setup is that the CONSOLE/DSP is not
functional... I am not sure if the two problems are related. Any help is
appreciated. Please see my two examples
below:
Unless my incoming
DID (2000), is pointed to a SIP station that is registered and
functional, I do not receive call progress tones on inbound
calls.
If I point the DID
to an application like:
[inbound_pri]
; PRI from the NEAX2400
; PRI from the NEAX2400
exten =>
2000,1,Wait,3
exten => 2000,2,Answer
exten => 2000,3,MeetMe,|Mps
exten => 2000,4,Hangup
exten => 2000,2,Answer
exten => 2000,3,MeetMe,|Mps
exten => 2000,4,Hangup
I will not hear any
initial ringback, and once answered there will be no audio on the
channel.
If I point the DID
to a registered SIP station like:
[inbound_pri]
; PRI from the NEAX2400
; PRI from the NEAX2400
exten =>
2000,1,Wait,3
exten => 2000,2,Dial,SIP/2001,15,Tr
exten => 2000,Hangup
exten => 2000,2,Dial,SIP/2001,15,Tr
exten => 2000,Hangup
It will provide
ringback tone to the calling channel on the PRI, and when the ringing
SIP phone answers there will be 2-way speech path.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
