Re: [Asterisk-Users] Vlan question

[Bryan Vyhmeister]

From what I have been told and my own experience, you cannot set the 
7960G's switch port to be in a different VLAN unless you are using a 
Cisco switch. The way it is set on a Cisco switch is through the 
following configuration parameters for an individual port:

switchport mode access
switchport access vlan 3
switchport voice vlan 2
The voice traffic than flows on vlan 2 and the network traffic from the 
PC is on vlan 3.

Bryan
[EMAIL PROTECTED] wrote:
I am setting up an Asterisk system with Cisco 7960 phones.  I have a PoE 
injector to insert between the patch panel and HP 2626 switch.  I plan 
to plug the users pc into the phone and the phone into the wall.  I 
would like the phones to have a seperate subnet from the phones for 
performance reasons.

May be a silly question, but with the pc and phone sharing the same 
switch port, how will it know to seperate the traffic and subnets?
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users