Guys:
Have you sorted this issues?
I am interested to know if C.A.S. is supported.
Any idea?
I saw googled some posts from the developers, but as far as January this year, it was still under development.
Much appreciated beforehand,
Carlos H.
Marcelo Rodriguez wrote:
Well I turn on the pri intense debuging and the only message that I
could find was this: [ 00 01 7f ]
Unnumbered frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 000 EA: 1
M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended) ]
0 bytes of data
Sending Set Asynchronous Balanced Mode Extended
Also Scott was right I was using the wrong setting , changes the
zaptel.conf file with this span=1,1,0.ccs,hdb3
the /proc/zaptel/1 now shows this : Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS ClockSource
But I can't still get the Zap channel to dial , any other thoughts?
Thanks in advance
Marcelo Rodriguez
On Wed, 2004-08-04 at 09:58, Horacio J. PeÃa wrote:
Well as you sugested I changed to ccs, hdb3 and nothing happen. Well the
message on /proc/zaptel/1 changes to Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW
ClockSource
But at the end when I try to dial I still have the same errors
Any thoughts?
I'm very new to asterisk, so take my words with a grain of salt.
First, you should ask your provider what signalling type you should use (ami/hdb3, cas/ccs, crc4/nocrc) Then configure that on zaptel.conf
On asterisk, "pri intense debug span 1" will let you see anything that is happening over the E1.
Saludos>!
Saludos? Si hablas castellano no nos gastemos en usar ingles :-)
Aug 4 09:40:51 DEBUG[1217602880]: pbx.c:1255 pbx_extension_helper: Launching 'Dial' Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 1 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 2 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 3 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 4 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 5 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 6 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 7 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 8 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 9 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 10 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 11 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 12 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 13 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 14 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 15 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 17 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 18 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 19 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 20 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 21 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 22 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 23 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 24 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 25 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 26 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 27 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 28 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 29 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 30 Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using channel 31 Aug 4 09:40:51 NOTICE[1217602880]: app_dial.c:714 dial_exec: Unable to create channel of type 'Zap' == Everyone is busy/congested at this time Aug 4 09:40:51 DEBUG[1217602880]: app_dial.c:974 dial_exec: Exiting with DIALSTATUS=CHANUNAVAIL.
On Wed, 2004-08-04 at 09:28, Horacio J. PeÃa wrote:
[zaptel.conf]
span=1,1,0,cas,ami
Are you sure that "cas,ami" is correct? I'm using "ccs,hdb3"
Saludos,
HoraPe
---
Horacio J. PeÃa
[EMAIL PROTECTED]
[EMAIL PROTECTED]
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
