Tim Sailer wrote:
I have a system that has a TDM400 with 3 FXO modules. Recently, the system started not seeing the ports. No answer, no lines available
for oubound dial, and only a reboot of the machine will bring it back.
Any ideas to try?
Greetings,
I also suffer this problem, though slightly different. When it strikes the 2nd FXS module (in slot 3) goes mostly dead, I say mostly because it still recives rings but seems unable to go off hook. The phones plugged in to that jack ring, but when you pick them up it doesn't answer and the speaker pulses with the ring. If you pick up and try to dial you don't get a dial tone either.
Both the 1st FXS and the FXO work relatively close to normal, the exception being worse then normal echo.
This seems to take acouple weeks to happen and when it does I usually can just unload the modules, load 'em up and restart asterisk and all works again.
Hardward:
Intel motherboard, PIII 667, TDM400 with 2FXS modules (bought Nov '03), a X100P
Software:
Ver 1.0 of Asterisk via Debian pacakge.
Ver 1.25 2004/01/02 23:28:52 of Zaptel drivers.
Ver 2.4.20 vanilla Kernel
Regards, Hez _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
