Hello, I tried to configure a cisco 7905 IP phone using the skinny channel but I had not much luck.
The relevant portion of skinny.conf is: [cisco1] device=SEP000F3487F8E3 callerid="Alex" <123-456-789> mailbox=500 callwaiting=1 transfer=1 context=default threewaycalling=1 line => 500 ; Dial(Skinny/[EMAIL PROTECTED]) I set up the tftp server, and prepared the following XMLDefault.cnf.xml: <Default> <callManagerGroup> <members> <member priority="0"> <callManager> <ports> <ethernetPhonePort>2000</ethernetPhonePort> </ports> <processNodeName>10.123.123.33</processNodeName> </callManager> </member> </members> </callManagerGroup> </Default> The phone get recognised and registered by asterisk, the problem is that when I pick up the phone I get no dial tone, I think this is because this event is not noted by asterisk. In fact I'm able to dial the cisco from another phone (a budge tone 101), but when I pick up the phone the 7905 still rings. The funny thing is that on the cisco I can hear what i say into the budge tone. The other way around does not work: if I speak on the cisco nothing is heard on the other phone. Is there something I can do to improve the situation or simply that device is not supported (without using a SIP image, that I'm unable to buy, for the moment) ? Thanks for the help, Alex _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
