Can you please say what problems you're having? Does the board come up correctly and display a green LED? Are there errors on the console
Etc...etc Thanks Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Harragin Sent: Thursday, August 05, 2004 8:55 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] PRI protocol question... I'm having difficulty getting a PRI working between asterisk and a Merlin Legend. I have been attempting to get it going as esf, b8zs & 5ess (although I have tried other switchtypes...). I found the following info in the Legend docs: If the switch type is 5ESS, the protocol MUST be set for ATT Custom. If switch type is DMS-100, the protocol MUST be set for NTNAPRI The README in libpri implies that switchtype=5ess is ATT Custom from README: ...it has been tested work with NI-2, Nortel DMS-100, and Lucent 5E Custom protocols on switches from Nortel and Lucent. Is the protocol set to ATT Custom with the switchtype=5ess parameter? Are the terms ATT Custom or NTNAPRI meaningfull to asterisk? Thanks, John _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
