>>When I load wct1xxp and zaptel and do a ztcfg -v all channels come up, but I get a pulsing orange light. (normal ?) On the Definity side, the 464 has red lights pulsing on 2 and 4.
Hi- Better post your zaptel.conf and zapata.conf. I'm not a Definity expert, but something's wrong. Maybe, for example, you should be configured as signalling=pri_net, rather than pri_cpe. Also, I wonder if you should be using a T1 cross-over cable - you should get a green light on the T100P if asterisk is up and things are configured correctly. A crossover cable is wired as follows: 1 <--> 4 2 <--> 5 4 <--> 1 5 <--> 2 Regards Scott Stingel Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, August 05, 2004 8:27 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Avaya/Lucent Definity -> Asterisk interop question _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
