I am unable to make quadbri board to work in NT mode, in TE mode it works OK. I have set 5 jumpers to NT mode. Dmesg shows everything OK:
qozap: Junghanns.NET quadBRI card configured at mem 0xd084e000 IRQ 9 HZ 100 CardID 1 qozap: S/T ports: 4 [ TE TE TE NT ] qozap: 1 multiBRI card(s) in this box, 4 BRI ports total. from Asterisk side seems to be ok. pri show span 4 Primary D-channel: 12 Status: Provisioned, Up, Active Switchtype: EuroISDN Type: Network (PtMP) Window Length: 135411676/135411612 Sentrej: 135412124 SolicitFbit: 135411996 Retrans: 135412060 Busy: 135411548 Overlap Dial: 0 -------------------- Using Stright cable ( do hope that board croses pins with jumpers). But niver small lucent PBX indicates link, niver ISDN Courier I modem connects to board. Has anybody idea were to dig? Configuration looks like: cat /etc/asterisk/zapata.conf [channels] switchtype = euroisdn signalling = bri_cpe_ptmp hidecallerid=no usecallerid=yes callerid=5555 pridialplan = local prilocaldialplan = local echocancel = yes context=incomming group = 1 channel => 1-2 group = 1 channel => 4-5 group = 1 channel => 7-8 group = 2 signalling = bri_net_ptmp channel => 10-11 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
