Mike Benoit wrote:
I have a P3-800 with two IDE drives in a software RAID1 configuration.
Each drive is on a separate IDE channel. Now anytime there is HD
activity, I hear "beeps" and "cutting out" on a call using the X100P
card.
I ran the zttest program, and discovered HD activity would drop the
accuracy down to between 2% and 50%.
However I noticed if I disabled one drive in the RAID1 array, zttest would always report 99.98% or higher. So one drive running works fine, but as soon as I enable the second drive, all hell breaks loose. DMA and 32-bit mode are enabled on both drives as well.
Have you tried hdparm -u1 on the drives as well? This prevents other IRQs being blocked during disk access.
Regards,
Richard
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
