hi I had the saem trouble, so I just took my x100p card out and the problem went away:)
I know its not the ultimate solution, but I decided to use an ATA with my analgue phone instead. I would suggest trying to put the analogue lines as channel 7 and the isdn lines as channels 1-6 Good luck regards Clive On Thu, 08 Jul 2004 11:52:23 +0200 Tomaz <[EMAIL PROTECTED]> wrote: > hello, > > i have a problem starting asterisk with one x100p digium > and two hfc chipset isdn cards with bri-stuff.0.0.2. > > > "ztcfg -vv" shows me a this info: > > > Zaptel Configuration > ====================== > > SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: Individual Clear channel (Default) (Slaves: > 02) > Channel 03: Individual Clear channel (Default) (Slaves: > 03) > Channel 04: D-channel (Default) (Slaves: 04) > Channel 05: Individual Clear channel (Default) (Slaves: > 05) > Channel 06: Individual Clear channel (Default) (Slaves: > 06) > Channel 07: D-channel (Default) (Slaves: 07) > > 7 channels configured. > > ZT_SPANCONFIG failed on span 1: Invalid argument (22) > > ------------------------------------------------------------- > > cat /etc/zaptel.conf > > loadzone=nl > defaultzone=nl > fxsks=1 > ######################## > loadzone=nl defaultzone=nl > span=1,1,3,ccs,ami > bchan=2-3,5-6 > dchan=4,7 > > and > > # cat /etc/asterisk/zapata.conf > > [channels] > switchtype = euroisdn > ; p2p TE mode > signalling = bri_cpe > ; > prilocaldialplan=national > pridialplan = unknown > ; > echocancel=yes > group = 1 > context=isdn > channel => 2-3,5-6 > > group = 2 > context=gsm > signalling=fxs_ks > channel => 1 > > --------------------------------------------- > but when i start asterisk i got this errors: > > Parsing '/etc/asterisk/zapata.conf': Found > Jul 8 13:53:58 WARNING[16384]: chan_zap.c:682 zt_open: > Unable to specify channel 2: No such device or address > Jul 8 13:53:58 ERROR[16384]: chan_zap.c:5397 mkintf: > Unable to open channel 2: No such device or address > here = 0, tmp->channel = 2, channel = 2 > Jul 8 13:53:58 ERROR[16384]: chan_zap.c:7668 setup_zap: > Unable to register channel '2-3' > Jul 8 13:53:58 WARNING[16384]: loader.c:313 > ast_load_resource: chan_zap.so: load_module failed, > returning -1 > == Unregistered channel type 'Tor' > == Unregistered channel type 'Zap' > -- Unregistered channel 1 > Jul 8 13:53:58 WARNING[16384]: loader.c:408 > load_modules: Loading module chan_zap.so failed! > Segmentation fault > > > what to do? i have latest CVS asterisk .. > thank you, > Tomaz > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _____________________________________________________________________ For super low premiums ,click here http://www.dialdirect.co.za/quote _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
