Junaid Saeed Uppal wrote:
I have a cologne chip isdn pci card too , can you tell me what distro are you using and what procedure did you follow to get it working with isdn4linux?
regards
~uppal
I'm using zaphfc (not i4l)with RH 9.0 and bristuffbri-stuff-0.0.2a-pp. I had to modify zaphfc.c and change to PCI_VENDOR_ID_ASUSTEK and PCI_DEVICE_ID_ASUSTEK_0675 (found these in pci_ids.h)
zaptel.conf: span=1,1,3,ccs,ami bchan=1-2 dchan=3 ...
zapata.conf signalling=bri_cpe_ptmp pridialplan=local prilocaldialplan=local echocancel=yes immediate=yes group=5 context=mainmenu channel=1-2 ...
When I change the ccs/ami parameters to esf/b8zs (or anything else) there is no obvious effect (I had to modify zaphfc.c to allow other span parameters).
However, I'm getting a segfault when I try "pri intense debug span 1" ("pri debug span 1" works ok). I'm trying to locate my gdb book in order to analyze the core file.
Jonathan Sadler says IE 0x2a (IE 42) is for "display text" such as CID name info.
Good luck with your card.
-- Michael Welter Introspect Telephony Corp. Denver, Colorado +1 303 674 2575 [EMAIL PROTECTED] www.introspect.com
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
