On July 8, 2004 02:18 am, [EMAIL PROTECTED] wrote: > On Wed, 7 Jul 2004, Ryan Courtnage wrote: > > Hello, > > > > Over the past several weeks, we have been having an intermittant problem > > with our deployment of a TDM400P card (4 fxo). �We have tried many > > things, and the problem still re-occurs. > > > > The Problem: > > > > Occasionally (every 48 hours), the TDM400p card will stop answering > > incoming calls on ALL fxo ports. �Attempts to send outbound calls on any > > Zap channel will result in hearing a loud 'static' noise on the line. > > On one occasion the problem actually occurred while someone was on an > > active call with the PSTN. �25 minutes into the call, this loud static > > noise occurred, and the call was dropped. > > Debug log files show nothing unusual. It's obvious that * is unaware > > that there is any problem with the card. > > I had a simmilar problem with an FXS card in a Compaq ML330. I would get a > power reset message on my server console. Are you sure the noise is coming > from the FXO ports? Are you using SIP phones, or ZAP?
Using SIP phones. I think the 'static noise' or just a symptom of the card going into this non-working state - or visa-versa. I also believe that the tdm400p card (or driver) is to blame, and not the FXO modules on the card. Aside from your's, I have heard reports of people having similar problems with their cards loaded with FXS modules. I do not get these 'power reset' messages. What did you do to resolve the issue? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
