ZapHFC's seem to give a lot of trouble on certain hardware... try using a different machine to host both cards in.
Kind regards,
Michael
Ernst Lehmann wrote:
Hello List,
is someone operating a DID /P2P / Anlagenanschluss with more than one HFC-Based ISDN-Card ???
I have now 12 hours of setup-troubles behind me with Colt-Telekom, where we did not get it working with two HFC-based cards.
Here the setup:
- 2 HFC-ISDN-Cards (the one from Conrad-Electronic) - bri-stuff.0.0.2 (with the asterisk-sources from the download.sh-skript)
- two NTBAs from Colt-TK with P2P Mode and a block of 30 DID-Numbers
The Problem:
- when both cards are connected to the NTBAs, and asterisk is started, the Ports in the VST from Colt drop. - when only one card is connected, the Port stays up. - I played with various timing setups... second span with timing=2, or timing=0, but in all cases, the Switch at Colt drops the line... (Layer2-failure they told me)....
Has anybody a working setup, with two or more HFC-Cards ?? Can you please give me a hint, and which Telco-Carrier you use ??
TIA for all help regarding this.....
Here the setup:
zaptel.conf:
span=1,1,3,ccs,ami bchan=1-2 dchan=3 span=2,1,3,ccs,ami bchan=4-5 dchan=6
zapata.conf:
switchtype = euroisdn signalling = bri_cpe pridialplan=local prilocaldialplan=local echocancel=yes echocancelwhenbridged=yes echotrainig=yes overlapdial=no immediate=no group = 3 context=vonaussenkommend channel => 1-2
switchtype = euroisdn signalling = bri_cpe pridialplan=local prilocaldialplan=local echocancel=yes echocancelwhenbridged=yes echotrainig=yes threewaycalling=yes overlapdial=no immediate=no group = 3 context=vonaussenkommend channel => 4-5
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
