Martin,
Did you change the "context" parameter in oh323.conf and if you did, did you change it
to an appropriate context in your extensions.conf where musimi.dk can be called ??
The reason I ask is that I've just spend 1 1/2 hour (it was only a matter of time
before I had to, so...) compiling and installing PWLib 1.6.6, openh323 v1.13.5 and
oh323 0.6.3a onto my Fedore Core 1 with Asterisk CVS-HEAD-07/02/04-13:46:17.
Mind you, I followed the "README" from asterisk-oh323-0.6.3a.tgz to the letter...
I copied my "sip-incoming" context to "h323-incoming" in extensions.conf, changed
"context=voip-h323" to "context=h323-incoming" and "inBandDTMF=yes" in oh323.conf.
Fired up NetMeeting (Yeah.. I'm a Windows user.. So what..) and made a call to a
friend on FWD via IAX2.
The copy/pate stuff below is from a test context I made smilar to your trace...
*CLI> oh323 show conf
Configuration of OpenH323 channel driver
----------------------------------------
Version: 0.6.3
Listening on address: 192.168.0.200:1720
Gatekeeper used: No Gatekeeper
FastStart/H245Tunnelling/H245inSetup: OFF/OFF/OFF
Supported formats in pref. order: ALAW<0>
Jitter buffer limits (min/max): 20-100 ms
TCP port range: 10000 - 20000
UDP (RAS) port range: 10000 - 20000
UDP (RTP) port range: 10000 - 20000
IP Type-of-Service value: 4
User input mode: 2
Max number of inbound H.323 calls: 10
Max number of outbound H.323 calls: 10
Max number of simultaneous H.323 calls: 10
-- Executing NoOp("OH323/R2054", ""MSNetmeeting "<> - 06000") in new stack
-- Executing Dial("OH323/R2054", "IAX2/demo:[EMAIL PROTECTED]/6000") in new stack
-- Called demo:[EMAIL PROTECTED]/6000
-- Call accepted by 212.130.58.212 (format ALAW)
-- Format for call is ALAW
-- IAX2[212.130.58.212:4569]/1 answered OH323/R2054
-- Hungup 'IAX2[212.130.58.212:4569]/1'
== Spawn extension (local-h323-inbound, 06000, 2) exited non-zero on 'OH323/R2054'
-- Hungup 'OH323/R2054'
-- H.323 call 'ip$192.168.0.65:3801/2054' cleared, reason 4 (Cleared by remote
user)
I think you need to revise your dialplan and incoming context, something like this for
starters...
-- extract from extensions.conf --
[voip-h323]
;
; OH323 default context from oh323.conf
; Dial 0[number]
;
exten => _0.,1,NoOp,${CALLERID} - ${EXTEN}
exten => _0.,2,Dial(IAX2/demo:[EMAIL PROTECTED]/${EXTEN:1})
exten => _0.,3,Hangup()
-- Soren
----- Original Message -----
From: "Martin Kiefer" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 02, 2004 11:48 PM
Subject: [Asterisk-Users] H323 -> IAX
> Hi there
>
> I am pretty close on giving up on Asterisk :-/
>
> I am (still) trying to make a call from a H323 phone to an Asterisk
> provider using AIX. But H323 does not route the number to AIX. All it is
> transmitting is an "s".
>
> *CLI> -- Executing Dial("OH323/R27865",
> "IAX2/demo:[EMAIL PROTECTED]/s") in new stack
> -- Called demo:[EMAIL PROTECTED]/s
> Jul 2 23:43:55 WARNING[-1137550416]: chan_iax2.c:5231 socket_read: Call
> rejected by 212.130.58.212: No such context/extension
> -- Hungup 'IAX2[demo]/3'
> == No one is available to answer at this time
>
> The dialed should have been 6000 both it doesn't... Anyone knows why
> not?
>
> I have installed the asterisk from cvs using openh323_1.13.5 and
> asterisk-oh323-0.6.3a.
>
> I have placed this line in my extensions.conf:
> TRUNK=IAX2/demo:[EMAIL PROTECTED]
> exten => _.,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
>
> I am using the default settings in my oh323.conf. Am I missing something
> in this file?
>
> Best regards
> Martin Kiefer
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
