Some telcos require you only to send a certain number of digits. Try sending fewer and fewer digits and see if it starts working. E.g. instead of sending 1601abcdefg try sending 601abcdefg or abcdefg or defg or even fg
If this doesn't work, from the CLI type pri debug span x and see what you get in the SETUP message. Other possiblities are in zapata.conf - you may need to set the correct parameters for your type of PRI. Best thing might be to ask your telco how your line is configured. Please report back with success/failure. We all like to hear of people's successes as well as problems! Rgds Tim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of McInnis, JP Sent: 29 June 2004 15:13 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Outgoing CallerID on PRI problems For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten => _9XXXXXXX,1,SetCallerID(1601XXXXXXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of the extension that makes the outgoing call. We have tried using the variable SetCallerID(${BYEXTENSION}) but still get the same results. Any suggestions? JP McInnis, Director of Technology Copiah Lincoln Community College _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
