On Sun, 2004-06-06 at 15:56, Trevor Peirce wrote: > Hello, > > I've been playing around with two generic X100P analog cards to create a > proof-of-concept system before we go ahead and hook up a PRI. I'm > running into a reproducible problem with sound quality of bridged calls, > and am hoping someone will be able to point me in the right direction. > > I have in my dial plan a _9. extension so outgoing calls can be made... > the first thing is Wait(1) and then the Dial... > > A call comes in to the system and the menu plays with perfect quality. > The call is then forwarded out the other analog line, and when answered > the call quality is clear. > > The callee then presses # to transfer, and dials 9 then the number to > transfer the call to. Immediately the call is disconnected from the > callee, and the caller hears hold music. A couple seconds later when > the caller is transferred, call quality deteriorates. There is a > pulsating noise that causes the caller and new callee to barely be able > to hear each other. > > This happens every time and only on the 2nd call. The first call is > always clear.
I bet it is a analog based problem. I can assure you the PRI doesn't experience that kind of trouble. It is done regularly on our PRI. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
