> On Tue, 25 May 2004, Bartosz Jozwiak wrote: > > >Hello, > > > >I have just received Adtran TSU 600 with 24 FXS ports. > >I have installed sucessfuly T100P card. > > Sucessfully? > Did you load the module for the card?
Yes > What does 'ztcfg -v' show? ast05:~# ztcfg -vvv Zaptel Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Slaves: 04) Channel 05: FXO Kewlstart (Default) (Slaves: 05) Channel 06: FXO Kewlstart (Default) (Slaves: 06) Channel 07: FXO Kewlstart (Default) (Slaves: 07) Channel 08: FXO Kewlstart (Default) (Slaves: 08) Channel 09: FXO Kewlstart (Default) (Slaves: 09) Channel 10: FXO Kewlstart (Default) (Slaves: 10) Channel 11: FXO Kewlstart (Default) (Slaves: 11) Channel 12: FXO Kewlstart (Default) (Slaves: 12) Channel 13: FXO Kewlstart (Default) (Slaves: 13) Channel 14: FXO Kewlstart (Default) (Slaves: 14) Channel 15: FXO Kewlstart (Default) (Slaves: 15) Channel 16: FXO Kewlstart (Default) (Slaves: 16) Channel 17: FXO Kewlstart (Default) (Slaves: 17) Channel 18: FXO Kewlstart (Default) (Slaves: 18) Channel 19: FXO Kewlstart (Default) (Slaves: 19) Channel 20: FXO Kewlstart (Default) (Slaves: 20) Channel 21: FXO Kewlstart (Default) (Slaves: 21) Channel 22: FXO Kewlstart (Default) (Slaves: 22) Channel 23: FXO Kewlstart (Default) (Slaves: 23) Channel 24: FXO Kewlstart (Default) (Slaves: 24) 24 channels configured. > Is asterisk running? Does asterisk see the ports? (zap show channels) This is the following: *CLI> zap show channels Chan Extension Context Language MusicOnHold 1 default default 2 default default 3 default 4 default 5 default 6 default 7 default 8 default 9 default 10 default 11 default 12 default 13 default 14 default 15 default 16 default 17 default 18 default 19 default 20 default 21 default 22 default 23 default 24 default > > >Adtran is connected to t100p with crossover T1 cable. > >On T100P card I have a green light and on Adtran I do not get any > >errors or alarms. > >But I do not get dialtone on FXS ports. > > > >Adtran is configured: For Network Timing, fxs ports ore fxs_ls on Adtran. > > > >In zaptel.conf: > <snip> > > > Good luck, > > Steve It look ok isn't it ? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
